Case Studies - Commercial Floors

Dundee Chevrolet

Two Neat Coats with Aluminum Oxide This dealership owner knew he had to fix the problem area and protect the concrete, although did not want to spend a lot of money. The jobsite was prepped with shot blasting and two neat coats of Product 320 CrownShield 50. The top coat was heavily broadcasted and back rolled with # 60 aluminum oxide to provide slip resistance, easy clean up and durability. Since then all Chevrolet dealers service areas are spec’d with Product 315 Crown Shield SL at 1/8”and a choice of top coats, Product 334 Crown Pro 10 pigmented (UV Stable) or Product 319 Crown Shield UV pigmented (UV Resistant).

Job completed: June 2010

Fat Boyz Pub & Grill

A small town bar and restaurant. Owners wanted to achieve the effect of a larger space for their long narrow footprint. Product 316, Crown Shield 3-D SL was chosen and the dimensional effects in the specialized glitter in the 1/16” self- leveling system gives the room a deeper and wider look. Product 316 is applied over a cured black Product 320, Crown Shield 50 base coat. An Image, Product 309, laid in with fast cure Product 308 was added at the entry door. Top coated with Product 332, Crown Pro 6 and # 60 aluminum oxide throughout and a blend of # 60 and # 46 aluminum oxide around the doorways for extra safety against water and snow.

Job completed: April 2008

E’s Bakery

Brick walkway created by coating area with Product 320, Crown Shield 50 pigmented, cured and placed template down, Rolled Product 323, Crown Shield 40-2 over template, pulled template and broadcasted Colored Quartz Blend. After cured the brick pathway is ready to top coat. Surrounding area in a complimentary blend of ¼” flake to match grout lines. Top coat, Product 334, Crown Pro 10, 100% solids polyurea.

Job completed: September 2007

Black Light Bar 3-D

Dramatic 3-D effect. Product 320, Crown Shield 50 pigmented black. Product 316, Crown Shield 3-D SL, using a custom blend to fully work off the black base coat. Top Coat, Product 332, Crown Pro 6, with a light broadcast of # 60 aluminum oxide back rolled into top coat for safety in the wet environment.

Job completed: August 2009

Dollar Tree

New store in an old footprint. Heavy patching required using an EPC of Product 320, Crown Shield 50 and Grout and Patch blend silica. Patching throughout was ground flat and a double broadcast of Crown Colored Quartz UV Blend was applied with Product 323, Crown Shield 40-2 Straw for both lifts. Top coat of Product 334, Crown Pro 10.

Job completed: July 2008

Grainger Slurry & Quartz Broadcast

Due to heavy delamination on front slab of sales floor, the contractor applied a slurry mix of Product 320, CrownShield 50 and Crowns slurry blend silica to level out the concrete, wall to wall. After cured it was screened to smooth, followed by a broadcast of Crown Colored Quartz blend into Product 320, Crown Shield 50. Top coated with Product 332, Crown Pro 6.

Job Completed: May 2009

Merle Norman

Custom blend of ¼” flake, double broadcast into Product 320, Crown Shield 50. Top coat Product 334, Crown Pro 10, 100% solid polyurea. Fine aluminum oxide # 60 back rolled into top coat, A blend of # 60 and # 46 aluminum oxide near doorways, giving extra anti slip protection, the project is in a heavy snow area.

Job Completed: August 2006

Santa Barbara Harley Davidson

Multi colored double broadcast quartz, Product 323, Crown Shield 40-2, for base coat and intermediate coat. 1st top coat, Product 332, Crown Pro 6. Before second top coat, contractor put saw cuts between colors to insert metal strips with Product 120, Crown Crack Sealer (rapid cure). Final top coat Product 332, Crown Pro 6.

Job Completed: November 2009