Find the product that best meets your needs based on your industry.
CrownGloss™– is a clear 2-component high-performance, water-based, aliphatic urethane floor coating. Commercial applications generally are recoated every 1-5 years depending on conditions. Apporximate 85 gloss read at a 60 degree angle with good resistance to chemicals, abrasions and scratches.
View ProductsCrownSatin™ 8091– is a clear 2-component high-performance, water-based, aliphatic urethane floor coating. Commercial applications generally are recoated every 1-5 years depending on conditions. Approximately 40-60 gloss read at a 60 degree angle with good resistance to chemicals, abrasions and scratches.
View ProductsCrownMatte™ 8092– is a clear 2-component high-performance, water-based, aliphatic urethane floor coating. Commercial applications generally are recoated every 1-5 years depending on conditions. Matte gloss reads 15-30 at a 60 degree angle with good resistance to chemicals, abrasions and scratches.
View ProductsCrownCrack 7300 is a 2-component, low odor, liquid applied, polyurethane-alloy concrete repair system designed to repair concrete and masonry substrates. The new surface will protect concrete from weather, corrosion, erosion, freeze/thaw spalling and chemical attack.
View ProductsCrownCaulk 82A is a 2-component aromatic, 1:1 ratio, rapid setting, self leveling, 100% solids polyurea caulking compound for interior and exterior horizontal application.
View ProductsCrownCaulk HA, (Product No. 7126) is a 2-component, modified aliphatic, rapid setting, self-leveling, 100% solids polyurea caulking compound.
View ProductsCrownFlex 7260 is a 2-component, fast setting, fast curing, solvent free, flexible, high performance, and high solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces.
View ProductsCrownCrete U™ SC (Skim Coat) Product No. 810 is a 3-part urethane polymer concrete coating flooring product. This product is easily applied with squeegees, brushes, or rollers depending on the desired look. CrownCrete U SC is a heavy duty pigmented coating typically applied 8 to 16 mils thick depending on the design requirements. It is an all-purpose product designed to be used as a primer, mid-coat, topcoat or seal coat for pigmented broadcast systems. It can also be used for patching and coving when mixed with suitable aggregates.
View ProductsCrownCrete U™ 1/8” SL Product No. 818 is a 3-part urethane polymer concrete self-leveling product. It is a self-leveling slurry applied at 1/8” thick depending on design requirements. It is designed to withstand aggressive chemical attack, thermal shock resistance, or as an underlayment providing superior functional floor.
View ProductsCrownCrete U™ 1/4” Slurry Product No. 814 is a 3-part self-leveling, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy duty slurry cementitious urethane flooring material designed to be typically applied at ¼” thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment.
View ProductsCrownCrete U™ Slurry Grade Product No. 815 is a 3-part, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy-duty slurry cementitious urethane flooring material designed to be typically applied at 1/8” to 1/4" thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment
View ProductsCrownCrete U™ TG (Trowel Grade) Product No. 838 is a 3-part urethane polymer concrete trowel grade product. It is a high density packed heavy duty system applied at 3/8” thick depending upon design requirements. It is formulated to withstand the aggressive environments offering excellent chemical resistance and superior thermal shock resistance with top of the line functional performances of the CrownCrete U family.
View ProductsCrownCrete U™ Screed Product No. 839 is a 3-part, urethane polymer concrete. It is a heavy-duty rake and trowel applied or by the use of a screed box and trowel finished from a ¼” to ½” thickness. This product is part of CrownCrete U ™ family designed for aggressive environment area while offering the ease of application and quick return to services. The product can use used as a stand-alone or system design for looks and performances.
View ProductsCrownCrete U™ Cove Product No. 811 is a 3-part urethane polymer concrete Cove Base product. It is designed to withstand aggressive chemical attack, thermal shock resistance, and can be used as a patching materials. CrownCrete U Cove is an integral part of the CrownCrete U flooring family of products. The vertical portion can be installed to any height at 1/16" to 1/4" thickness.
View ProductsGreat to promote in cold temperature cure. Available Upon Request.
View ProductsCrownPro 7000 is a high solids, aliphatic polyaspartic polyurea with excellent retention, gloss and UV stability characteristics. It can be applied at any thickness of 8-12 mils (200-300 microns) in a single pass on horizontal surfaces or multiple passes on vertical surfaces. CrownPro 7000 is quick curing and specifically formulated to be installed in thin film applications.
View ProductsCrownPro 7072 SC is an aliphatic polyaspartic, environmentally friendly surface topcoat for several systems. CrownPro 7072SC is quick curing and specifically formulated to be installed in thin film applications. It is designed for use in Southern California and is in compliance with SCAQMD air quality standards.
View ProductsCrownPro 8072 is an aliphatic polyaspartic, environmentally friendly surface topcoat for flooring systems . CrownPro 8072 is quick curing and specifically formulated to be installed in thin film applications. It is designed for use in Southern California and is in compliance with SCAQMD air quality standards for Industrial Applications.
View ProductsCrownPro™ 40 is a clear, 2-component, high solids, solvent-based polyaspartic costing system. It’s tough, durable, UV-stable coating has been specifically engineered to be used as a topcoat sealant for all Crown Polymers floor coating systems. The CrownPro 40 delivers excellent chemical and abrasion resistance while providing an added protective layer to prolong the longevity of epoxy-based coatings.
View ProductsCrownPrime 7021 is a 2-component, high solids, liquid applied, epoxy - polyamine primer with unique penetrating characteristics. CrownPrime 7021 is ANSI/NSF 61 approved for direct contact with potable water.
View ProductsCrownPrime 7022 is a 2-component, high solids, liquid applied, epoxy - polyamine filler surfacer with unique characteristics of sealing pores in concrete
View ProductsCrownShield 301 is a two-component general purpose clear epoxy primer, coating and flooring mortar binder for broadcast and hand troweled or power troweled systems. It is an economical, low viscosity, low odor, 100% solids thermosetting epoxy.
View ProductsCrownStone Primer, Product No. 310 is a 2-component straw epoxy floor primer coating for concrete. It is 100% solids, moisture-insensitive, non-shrink, nearly no odor during application
View ProductsCrownShield 320 is a two-component general purpose epoxy primer, coating and flooring mortar binder for broadcast and hand troweled or power troweled systems. It is a low viscosity, low odor, 100% solids thermosetting epoxy.
View ProductsCrownShield® 40-2 , Product No. 323 is a 2-component pigmented modified epoxy floor base coating or epoxy polymer concrete (EPC) when aggregate is added. It is a 100% solids, moisture-insensitive, non-shrink, nearly no odor during application. It is not a top coat.
View ProductsCrownShield® SL, Product No. 315 is a three - component pigmented epoxy polymer concrete (EPC) that is a self-priming and self-leveling flooring overlay. It is a 100% solids, moisture- insensitive, non-shrink, nearly no odor during the one-lift application. A pigmented topcoat with Aluminum Oxide is used to provide anti-slip properties.
View ProductsCrownFlex™ Membrane, Product No. 304 is a 100% Solids, Moisture- insensitive, Non-shrink, 2-component Epoxy Membrane and Base Coat.
View ProductsCrownPro™ SparkShield is an Electrostatic Dissipating (ESD) Epoxy Overlay System. It consists of two products, Crown SparkShield 2mm SL Primer Base Coat , (Product No. 352), a 100% solids, low viscosity conductive epoxy 2mm SL Base Coat and CrownPro™ SparkShield Top Coat, (Product No. 353), a 100% solids, low viscosity, non-shrink, 2-component, modified conductive epoxy top coat used as a thin system designed to comply with NFPA 99 standards of static electricity dissipative surface resistance range of 1.0x106 to 1.0x109 ohms. The ESD system conducts electrical charges through the top coat into the conductive primer.
View ProductsCrownPro™ EPC TempShield , Product No. 356 is a 100% solid, 100% reactive, moisture- insensitive, non-shrink, two-component, modified Novolac Epoxy designed as an Epoxy Polymer Concrete (EPC) that adheres and cures on dry and moist concrete surfaces.
View ProductsCrownShield ® Line Striping (Product No 359) is a 100% solids, non-shrink, moisture- insensitive, two-component modified high- modulus smooth epoxy coating formulated to adhere and cure on damp or dry wood, steel and concrete surfaces.
View ProductsCrownSlurry Resin System , Product No. 305 is a three component self-leveling trowelable system. It provides an economical way to resurface, spalled and pitted concrete. Our Slurry Blend is formulated and designed to cure to a very tough and durable, dense surface for superior abrasion resistance. Support product with our Slurry Blend Product No. 305.
View ProductsCrownStone TD, System No. 311 is a 100% Solids, 100% reactive, moisture-insensitive non shrink, 3 component, Epoxy Polymer Mortar formulated to be hand or power-troweled applied at a typical thickness of 3/16" - 1/4" Crown TD cures to very tough and durable, dense mortar for applications demanding a superior abrasion wear and impact resistance.
View ProductsCrownClear, Product No. 326 is a two-c omponent clear epoxy floor topcoat. It is a 100% solids, non-shrink, highly modified for better UV resistance (see limitations), nearly no odor during application of the clear polymer.
View ProductsCrownShield, Product No. 319 is a two-component pigmented epoxy floor polymer. It is a 100% solids, non-shrink, highly modified for better UV resistance (see limitations), nearly no odor during applic ation of the poly mer.
View ProductsCrownFlex™ Joint Sealer Gel Grade, Product No. 501 is a 100% Solids, Moisture-insensitive, Non-shrink, 2-component Modified Epoxy Gel Consistency Joint Filler.
View ProductsCrownFlex™ Joint Sealer, Product No. 505 is a 100% Solids, Moisture-insensitive, Non-shrink, 2-Component Modified Epoxy Joint Filler.
View ProductsCrownCrack Sealer, Product No. 120 is a 100% solids, non-shrink, non-sag, moisture insensitive, 2-component modified high-modulus smooth epoxy paste adhesive formulated to adhere and cure on damp or dry surfaces.
View ProductsCrownStone Cove, System No. 312 is an epoxy system designed as an integral part of the flooring system. 100% solid, non shrink, 3 component polymer mortar. Formulated to be hand-trowel applied at 4" - 6" or more. CrownStone offers a decorative or industrial cove demanding a seamless floor to wall built system.
View ProductsGreat to promote in cold temperature cure. Available Upon Request.
View ProductsCrownPro AcidShield 7350 is a multifunctional phenol novolac resin that is extremely chemical resistant with a high heat deflection temperature. CrownPro AcidShield 7350 is a thick film novolac lining designed to cure at ambient temperature to provide exceptional corrosion protection for surfaces in severe chemical and physical environments.
View ProductsCrownPro AcidShield 7500 is a multifunctional phenol novolac resin that is extremely chemical resistant with a high heat deflection temperature. CrownPro AcidShield 7500 is a thick film novolac lining designed to cure at ambient temperature to provide exceptional corrosion protection for surfaces in severe chemical and physical environments
View Products