326 CrownClear is a two-component, UV Resistant, 100% solids, epoxy metallic coating, broadcast receiving, grout coat, and topcoat. It is designed as a tough, durable, and impact-resistant flooring product. It can be finish coated with UV Stable 8175 CrownPro Polyaspartic (Clear) or 8110 CrownSeal CRU Aliphatic Polyester Urethane (Clear) depending on end-use. It can be applied directly over 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America.
PRODUCTS
326 CrownClear™ UV Resistant Epoxy
UV Resistant High-Build Clear Epoxy Coating for CrownMetallic™ and CrownQuartz™ Commercial and Institutional Uses
Description
- Automotive Show Room Flooring
- Commercial and Institutional Decorative Flooring
- Residential and Commercial Garage Floors
- Hospital and Health Care Facility Flooring
- Laboratory and Research Flooring
- Pharmaceutical Flooring
Note: Top Coat or Finish Coat with Crown Polymers products.
- Complies with USDA, FDA, Food Safety Modernization Act.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- 100% Solids, Zero VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
Clear (near water clear).
© 2023 Crown Polymers Corp., All Right Reserved