• (847) 659-0300
CrownCrete-U™ Conductive Cementitious Urethane

CrownCrete-U™ Conductive Cementitious Urethane

CrownCrete-U814 CrownCrete-U Cementitious Urethane 8601 Conductive Primer, and 8602 Conductive Mortar 250 Mil(6.35 mm)System, 1/4 Inch.

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. 814 CrownCrete-U Pigmented or Neutral 30 sq. ft. (2.8 sq. m.) 3/16 inch (4.8 mm) per kit (A Component 8 lbs., B Component 8 lbs., and Component 39 lbs.).
  3. Insulation Coat320 CrownShield® Clear placed at 160 sq. ft.(10 mils) per gallon.
  4. Conductive Copper Tape Strip
  5. Conductive Primer Black – 8601 CrownPro StaticShield placed at 160 sq. ft. (10 mils) per gallon.
  6. Static Dissipative Coat8602 CrownPro StaticShield placed at 100 sq. ft. per gallon.

CrownCrete-U 814Cementitious Urethane, 8601 Conductive Primer, and 8602 ESD Conductive Mortar250 Mil (6.35 mm)Flooring System,I1/4 inch. Itmeets ANSI/ESD 2020 and ANSI/ESD STM7.1 Standards. It is electrically active within the resistance range of Static Dissipative 25 thousand to 1 million ohms (2.5E4-1E6) resistance range as tested per ANSI/ESD Association ANSI/ESD STM 7.1. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

  • Areo-space and Avionics Manufacturing
  • Automotive Manufacturing
  • Biotechnology Research and Manufacturing
  • Computer Rooms
  • Cosmetics Research and Manufacturing
  • EV Battery Production
  • Flammable Chemicals Production, Storage and Use
  • High-Tech Electronics
  • Hospital and Healthcare Facilities
  • Lazer and Optical Systems
  • Medical Equipment Manufacturing
  • Munition and Fireworks Production
  • Oil and Chemical Production
  • Pharmaceutical Research and Manufacturing
  • Powdered Foodstuffs Production
  • Semi-Conductor Production
  • Meets ANSI/ESD 2020 and ANSI/ESD STM7.1 Standards
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin:3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin:4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
  • VOC andEPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
  • Excellent Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved