- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Primer – 320 CrownShield® Clear, with or without broadcast aggregate at 200 sq. ft. (18.6 sq. m.) 8 mils (0.20 mm)
- Epoxy Binder and Aggregate – 320 CrownShield® Clear mixed binder and Trowel Natural Quartz place at 1/4 inch (6.5 mm). 320 CrownShield® 1.25 to 1.5 gallons to 100 lbs. of Estes’ TG – Trowel Grade, yield 48 sq. ft. (4.5 sq. m.) at 1/4 inch (6.5 mm). Clifford W. Estes Co. TG Trowel Aggregate or equal.
- Grout Coat – 320 CrownShield® Pigmented 160 sq. ft. (14.9 sq. m.) 10mils (0.25 mm)
- Finish Coat – 8175 CrownPro™ Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
CrownTrowel™ 320 CrownShield® Standard Epoxy Trowel Natural Quartz
CrownTrowel™ 320 CrownShield® Standard Epoxy Trowel Natural Quartz 250 Mils (6.5 mm), with 8175 CrownPro™ Aliphatic Polyaspartic Finish Coat System. 1/4 Inch.
System Build
CrownTrowel™ 320 CrownShield® Standard Epoxy Trowel Natural Quartz 250 Mils (6.5 mm), with 8175 CrownPro™ Aliphatic Polyaspartic Finish Coat Flooring System, 1/4 Inch. The system is placed at a nominal 1/4 Inch (0.66 mm). It meets the Unified Facilities Guide Specification 09 67 23.15 requirements for a five-step aircraft hangar flooring system. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Airport Hangars
- Automotive Shops and Mechanics Floors
- Commercial Buildings
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Pharmaceutical Floors
- School and University Floors
Note: Use appropriate Finish Coat
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
- All components are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved