• (847) 659-0300
CrownCoat™ MER 8320 CrownShield<sup>®</sup> Chemical Resistant Epoxy Pigmented Mechanical

CrownCoat™ MER 8320 CrownShield® Chemical Resistant Epoxy Pigmented Mechanical

CrownCoat MER 8320 CrownShield® Chemical Resistant Epoxy Pigmented Mechanical Equipment Reinforced Room Flooring System. It is Comprised of an Epoxy Primer, 1st Semi-Rigid Epoxy Membrane, Scrim or Fiber Glass Reinforcement, and 2nd Semi-Rigid Membrane Pigmented Epoxy Coating, Epoxy Top Coat, placed at a Nominal 65 Mils (1.65 mm).

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. Self-Priming 1st Semi-Rigid Membrane8502 CrownFlex Pigmented Placed at 80 sq. ft. (7.4 sq. m.) 20 mils (0.51 mm), and
  3. Embed Scrim Cloth 1.6 oz. per yd. or Fiber Glass Matt 1.5 oz. yd. Reinforcement Cloth in Step 2
  4. 2nd Semi-Rigid 8502 CrownFlex Pigmented 80 sq. ft. (7.4 sq. m.) 20 mils (0.51 mm)
  5. Grout Coat - 8320 CrownShield® Pigmented place at 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
  6. Top Coat8320 CrownShield® Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)

CrownCoat MER 8320 CrownShield® Chemical Resistant Epoxy Pigmented Mechanical Equipment Flooring System. The system is placed at a nominal 65 mils (1.65 mm). It is comprised of a primer, 1st semi-rigid epoxy membrane optional dimensional scrim or fiber glass, 2nd semi-rigid epoxy membrane, and top coat, with or without an optional sprinkling of skid resistant aluminum oxide aggregate. It can be applied directly over Crown Polymers 8303 CrownShield® moisture mitigation primer when it is required. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

  • Automotive Shops and Mechanics Floors
  • Commercial Buildings
  • Hospital and Health Care Facility Floors
  • Laboratories and Research Floors
  • Pharmaceutical Floors
  • School and University Floors
  • Note: Use appropriate Finish Coat

  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
  • VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
  • All components are VOC Compliant in all states and provinces in North America
  • Strong and Tough Floor.
  • Excellent Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved