301 CrownShield Clear is a two-component general purpose epoxy primer, coating, and flooring mortar binder for broadcast and hand-troweled or power-troweled product. It is a low viscosity, low odor, 100% solids thermosetting epoxy. It’s a general-purpose epoxy, an upgraded Crown Polymer product that can be added for superior chemical and abrasion-resistant topcoats and finish coats, such as 301 CrownShield Epoxy or Aliphatic Polyester Polyurethane or Polyaspartic top coats for industrial kitchens, commercial laboratories, andwineand spirit processing facilities subjected to heavy foot traffic, forklift traffic and chemical exposure. It can be applied directly over Crown Polymers 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America.
PRODUCTS
301 CrownShield®
General Purpose Epoxy Thru-Product - Primer, Body Coat, Binder, & Topcoat
Description
- Automotive Show Room and Repair Floors
- Commercial Bakery and Kitchen Floors
- Hospital and Health Care Facility Floors
- Laboratory and Research Floors
- Manufacturing and Warehouse Floors
- Pharmaceutical Floors
- School and University Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- SlipResistance(ADA)SeeCrownPolymersTechnical
- Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green
- Seal Information.
- 100% Solids, Zero VOC and EPA Compliant, and
- low odor during installation.
- Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor.
- Strong Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved