315 CrownShield is a three-component pigmented epoxy self-leveling system. It is 100% solids, epoxy binder and pre-engineered slurry aggregate (SP605 SL Sand) designed for resurfacing flooring product. It provides an economical resurfacing product that is designed to repair pitted and spalled concrete. 315 CrownShield is designed to be a tough, durable, abrasion and impact resistant flooring product. It is easily gauged racked or troweled in place. It is skid resistance can be upgraded with Crown Polymers Aluminum Oxide. It can be finished coated with Crown Polymers 8175 CrownPro Polyaspartic (Clear or Pigmented) or 8110 CrownSeal CRU Aliphatic Polyester Urethane (Clear or Pigmented). It can be applied directly over 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America
PRODUCTS
315 CrownShield® SL Self-Leveling Epoxy Overlayment
Self-Leveling Epoxy Overlayment for Commercial, Industrial and Institutional Floors One Lift: 1/8 Inch to 3/16 Inch (3.2mm to 4.8mm)
Description
- Automotive Show Room and Repair Floors
- Commercial Bakery and Kitchen Floors
- Hospital and Health Care Facility Floors
- Laboratory and Research Floors
- Manufacturing and Warehouse Floors
- Pharmaceutical Floors
- Schools and University Floors
- Note: Use appropriate Topcoat and Finish Coat
Note: Use appropriate Top Coat and Finish Coat
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- 100% Solids, Zero VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
Standard Colors and Custom Colors
© 2023 Crown Polymers Corp., All Right Reserved