319 CrownShield is a two-component pigmented epoxy UV-resistant floor coating. It is a UV-resistant and low odor coating. It can be used as a pigmented neat topcoat for broadcast, slurry broadcast, and trowel mortar systems when UV resistance is desired. It is a general-purpose epoxy requiring upgraded topcoats and finish coats for superior chemical and abrasion resistance, such as 8320 CrownShield® Superior All-n-One Epoxy Thru-Product™ or Aliphatic Polyester Polyurethane for industrial kitchens, commercial laboratories, and wine and spirit processing facilities subjected to heavy foot traffic, forklift traffic and chemical exposure. It can be applied directly over Crown Polymers 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America.
PRODUCTS
319 CrownShield® Pigmented Epoxy
General Purpose Epoxy Thru-Product - Primer, Body Coat, Binder, & Topcoat
Description
- Automotive Show Room and Repair Floors
- Commercial Bakery and Kitchen Floors
- Hospital and Health Care Facility Floors
- Laboratory and Research Floors
- Manufacturing and Warehouse Floors
- Pharmaceutical Floors
- School and University Floors
Note: Use appropriate Top Coat and Finish Coat
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical
- Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- 100% Solids, Zero VOC and EPA Compliant, and
- low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor
- Strong Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
Available in factory pigments in Crown Polymers Standard Colors and Custom Colors.
© 2023 Crown Polymers Corp., All Right Reserved