320 CrownShield is a two-component general purpose epoxy primer, coating, and flooring mortar binder for broadcast and hand-troweled or power-troweled product. It is a low viscosity, low odor, 100% solids thermosetting epoxy. It’s a general-purpose epoxy, an upgraded Crown Polymer product that can be added for superior chemical and abrasion- resistant topcoats and finish coats, such as, 320 CrownShield Hybrid Epoxy or Aliphatic Polyester Polyurethane for industrial kitchens, commercial laboratories, and wine and spirit processing facilities subjected to heavy foot traffic, forklift traffic and chemical exposure. It can be applied directly over Crown Polymers 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America.
PRODUCTS
320 CrownShield® General Purpose Thru-Product™
General Purpose Epoxy Thru-Product - Primer, Body Coat, Binder, & Topcoat
Description
- Automotive Show Room and Repair Floors
- Commercial Bakery and Kitchen Floors
- Hospital and Health Care Facility Floors
- Laboratory and Research Floors
- Manufacturing and Warehouse Floors
- Pharmaceutical Floors
- School and University Floors
- Note: Use appropriate Top Coat and Finish Coat
Note: Use appropriate Top Coat and Finish Coat
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- 100% Solids, Zero VOC and EPA Compliant, and
- low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor
- Strong Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
Clear
© 2023 Crown Polymers Corp., All Right Reserved