8101 CrownSeal is a single component, waterborne, ultraviolet stable, high-performance, fast-drying acrylic emulsion. It is used as a vinyl chip as a clear grout coat, and it is used as a Concrete, Cementitious Overlays, Masonry and Porous Bricks and Pavers sealer. As a grout coat for CrownFlake vinyl chips it should be placed at 200 sq. ft. (18.6 sq. m.) per gallon. As a sealer place of clean, sound, and durable Concrete, Cementitious Overlays, and Masonry at 300 to 350 sq. ft. (27.9 to 32.5 sq. m.) per gallon. Porous Bricks and Porous Pavers the sealer demand will vary depending on their porosity. It is VOC Compliant in all states and provinces in North America.
PRODUCTS
8101 CrownSeal™ Acrylic-WB
Water Base, Low Viscosity, Acrylic Grout and Sealer Concrete, Masonry & Brick
Description
- Grout Coat for Color Flake
- Sealer for Concrete, Cementitious Overlayment, and Masonry
- Sealer for Porous Bricks or Porous Pavers
- Self-Priming
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical
- Bulletin: 4 Coefficient of Friction
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green
- Seal Information.
- High Solids, Low Zero VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor.
- Strong Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
Clear
© 2023 Crown Polymers Corp., All Right Reserved