CrownShield® 8318 is a two-component, low viscosity, high build, epoxy binder designed for decorative and industrial flooring. It comes in three different cure speeds: Standard, Medium, and Fast. It can be applied directly over Crown Polymers 8303 CrownShield® MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America. “S” – Slow Cure Hardener (Gel time 50 minutes) is designed for temperatures ranging from 50°F to 80°F (10°C to 27°C). “M” – Medium Cure Hardener (Gel time 30 minutes) is designed for temperature ranging from 50°F to 80°F “F” – Fast Cure Hardener (Gel time is 15 minutes) designed for temperatures ranging from 40°F to 60°F (4°C to 16°C).
PRODUCTS
8318 CrownShield®
Epoxy Coatings for Decorative and Industrial Flooring
Description
- Aircraft Hangar and Maintenance Floors
- Automotive Show Room and Repair Floors
- Commercial Bakery and Kitchen Floors
- Hospital and Health Care Facility Floors
- Laboratory and Research Floors
- Manufacturing and Warehouse Floors
- Pharmaceutical Floors
- School and University Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green
- Seal Information.
- High Solids, Low VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor
- Strong Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
Clear
© 2023 Crown Polymers Corp., All Right Reserved