8328 CrownShield Metallic LV Epoxy Binder is a two-component, low viscosity, 100% solids, self-priming epoxy binder designed to be used with CrownMetallic Pigments SP710 from 10 to 32 mils (0.25mm to 0.81 mm) and finish coated with 8110 CrownSeal CRU or 8175 CrownPro Polyaspartic. CrownMetallic employs a decorative mineral mica (igneous, metamorphic, and sedimentary) ranging in a wide variety of naturally occurring colored crystals that are mechanically cleaved into extremely thin elastic platelets. It is ideal for use in automotive showrooms, garages, foyers, laboratories, museums, restaurants, retail outlets, schools, universities, wine, and spirit processing facilities. It can be applied directly over Crown Polymers 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America
PRODUCTS
8328 CrownShield® CrownMetallic™ Epoxy Clear LV Coating
Epoxy Clear LV Coatings for Metallic Flooring
Description
- Automotive Show Room and Repair Floors
- Commercial Bakery and Kitchen Floors
- Hospital and Health Care Facility Floors
- Laboratory and Research Floors
- Manufacturing and Warehouse Floors
- Pharmaceutical Floors
- School and University Floors
Note: Use appropriate Top Coat and Finish Coat
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information
- 100% Solids, Zero VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor
- Strong Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
Clear Resin
© 2023 Crown Polymers Corp., All Right Reserved