• (847) 659-0300
8504 CrownFlex™ Semi-Rigid

8504 CrownFlex™ Semi-Rigid

Semi-Rigid Non-Sag Paste Joint Sealant & Crack Filler & Patching Material

Description

8504 CrownFlex is a two-component, 100% solids, semi-rigid thixotropic epoxy cove base binder, orange peel coating and a sag-resistant control joint and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. For armoring concrete joint and crack edges use 8504 CrownFlex instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint or crack edges. It is used on floors, joints, and cracks subjected to heavy foot traffic, forklift traffic, and chemical attack, specifically food acids. Also, it is used as an epoxy membrane for waterproofing and crack dampening under epoxy coating and flooring systems. It is VOC Compliant in all states and provinces in North America.

  • “S” – Standard Cure Hardener is designed for temperatures ranging from 50°F to 80°F (10°C to 27°C).
  • “F” – Fast Cure Hardener is designed for temperatures ranging from 40°F to 60°F (4°C to 16°C).

  • Static Control Joint and Non-Moving Crack Filler
  • Embedded detector wire loop for traffic signals, electric gates and Robotics
  • Control Joint and Concrete Crack Filler
  • Patching Vertical, Overhead and Horizontal Extended with Aggregate
  • Patching Binder Extended with Aggregate
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical
  • Bulletin: 4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green
  • Seal Information.
  • 100% Solids, Zero VOC and EPA Compliant, and
  • low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
  • Strong and Tough Floor.
  • Strong Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors

Clear

© 2023 Crown Polymers Corp., All Right Reserved