STANDARD EPOXY PRODUCTS

301 CrownShield

301 CrownShield Clear is a two-component general purpose epoxy primer, coating, and flooring mortar binder for broadcast and hand-troweled or power-troweled product. It is a low viscosity, low odor, 100% solids thermosetting epoxy. It’s a general-purpose epoxy, an upgraded Crown Polymer product that can be added for superior chemical and abrasion-resistant topcoats and finish coats

View Product

305 CrownSlurry Resin System

CrownSlurry Resin System, Product No. 305 is a two-component self-leveling epoxy system. It provides an economical way to resurface, spalled and pitted concrete. Designed to cure to a very tough and durable, dense surface for superior abrasion resistance.

View Product

310 CrownStone Epoxy Primer and Coating

310 CrownStone is a two-component clear amber coating product. It is a low viscosity, low odor, moisture-insensitive epoxy. As an epoxy primer it can be used with CrownStone TD system.

View Product

311 CrownStone TD

CrownStone TD, System No. 311 is a 100% Solids, 100% reactive, moisture-insensitive non shrink, 3 component, Epoxy Polymer Mortar formulated to be hand or power-troweled applied at a typical thickness of 3/16 – 1/4 in. Crown TD cures to very tough and durable, dense mortar for applications demanding a superior abrasion wear and impact resistance

View Product

312 CrownStone Cove

CrownStone Cove, System No. 312 is an epoxy system designed as an integral part of the flooring system. 100% solid, non shrink, 3 component polymer mortar. Formulated to be hand-trowel applied at 4″ – 6″ or more. CrownStone offers a decorative or industrial cove demanding a seamless floor to wall built system.

View Product

315 CrownShield SL Self-Leveling Epoxy Overlayment

315 CrownShield is a three-component pigmented epoxy self-leveling system. It is 100% solids, epoxy binder and pre-engineered slurry aggregate (SP605 SL Sand) designed for resurfacing flooring product. It provides an economical resurfacing product that is designed to repair pitted and spalled concrete.

View Product

320 CrownShield General Purpose Thru-Product

320 CrownShield is a two-component general purpose epoxy primer, coating, and flooring mortar binder for broadcast and hand-troweled or power-troweled product. It is a low viscosity, low odor, 100% solids thermosetting epoxy. It’s a general-purpose epoxy, an upgraded Crown Polymer product that can be added for superior chemical

View Product

356 CrownPro TempShield Novolac

356 CrownPro is a two-component, 100% solids, heat resistant Novolac epoxy base coat, and mortar binder when select trowelable mortar aggregate is incorporated. It is designed to be a tough, durable, and impact-resistant flooring product. It is a base coat and can be troweled in place.

View Product

8312 CrownCove

CrownCove is a clear, 2-component, 100% solids, and thermosetting thixotropic epoxy designed specifically for vertical applications where sag resistance is desired. Formulated to be hand-trowel applied at 4” or 6” or more, such as 6” height with 1” radius cove.

View Product

8328 CrownShield CrownMetallic Epoxy Clear LV Coating

8328 CrownShield Metallic LV Epoxy Binder is a two-component, low viscosity, 100% solids, self-priming epoxy binder designed to be used with CrownMetallic Pigments SP710 from 10 to 32 mils (0.25mm to 0.81 mm) and finish coated with 8110 CrownSeal CRU or 8175 CrownPro Polyaspartic.

View Product

359 CrownShield Line Striping

CrownShield® Line Striping (Product No 359) is a 100% solids, non-shrink, moisture-insensitive, two-component modified high-modulus smooth epoxy coating formulated to adhere and cure on damp or dry wood,steel and concrete surfaces.

View Product

8355 CrownShield Pigmented Epoxy

8355 CrownShield is a 2 component, high build, high pigmented load epoxy binder that is specially designed to receive CrownFlake System vinyl chips 1/8 inch and 1/4-inch flakes. It is self-priming and it is formulated as a moisture tolerant epoxy binder and bonds tenaciously dry or damp concrete.

View Product

8318 CrownShield

CrownShield® 8318 is a two-component, low viscosity, high build, epoxy binder designed for decorative and industrial flooring. It comes in three different cure speeds: Standard, Medium, and Fast. It can be applied directly over Crown Polymers 8303 CrownShield® MVB (moisture mitigation primer).

View Product
© 2023 Crown Polymers Corp., All Right Reserved