8202 CrownPrime is a high-performance 2-component water-borne epoxy primer. It is designed to bond to properly prepared concrete substrates that may have been contaminated by sodium silicate, potassium silicate, or lithium silicate surface hardeners or curing agents. It contains no migratory plasticizers, phenols, or unreacted amines that migrate out of competitor’s primers, leading to adhesion problems, especially when concrete moisture problems exist. It is the only primer formulated for use under 8303 CrownShield MVB Moisture Vapor Barrier Epoxy. Also, it can be used under all other Crown Polymers epoxy and polyurethane products and systems. It is VOC Compliant in all states and provinces in North America.
PRODUCTS
8202 CrownPrime™
Water Base, an Economical Clear Epoxy Primer & Pigmented Thin Mil Coating
Description
- General-purpose primer with excellent wetting capabilities.
- Rapid curing.
- Can be used over properly prepared concrete that dry or damp SSD (saturated surface dry).
- It is recommended as a pigmented primer under CrownMetallic.
- Can be used as an economical “light duty” thin mil coating system.
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Strong and Tough Floor.
- Strong Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved