8372 TerraCrown Flex is a two-component, low viscosity, 100% solids, semi-rigid epoxy terrazzo membrane, and joint sealant and crack filler. It features a combination of excellent adhesion and elongation not available in general purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. It is used for embedding detector wire loops for traffic signal, electric gates and robotics. It is used under thin-set epoxy terrazzo floors, joints and cracks subjected to heavy foot traffic, cart and fork lift traffic and chemical attack, specifically food acids. In addition, it is used as an epoxy membrane for waterproofing and crack dampening. As a membrane under thin set epoxy terrazzo, it meets NTMA and TTMAC requirements. It is VOC Compliant in all states and provinces in North America.
PRODUCTS
8372 TerraCrown™
Semi-Rigid Epoxy Low Viscosity Membrane, and Static Joint Sealant and Crack Filler
Description
- Detector Wire Loops for Traffic Signal, Electric Gates and Robotics
- Control Joints and Crack Semi-Rigid Sealant
- Concrete and Polymer Floor Joint Edge Reinforcement
- Waterproofing Membrane with or without Dimensional Fiberglass or Scrim Reinforcement
- Crack Isolation Membrane with or without Dimensional Fiberglass or Scrim Reinforcement
- NTMA and TTMAC Membrane with or without Dimensional Fiberglass or Scrim Reinforcement
- Mechanical Equipment Room Damping Membrane with or without Dimensional Fiberglass or Scrim Reinforcement
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant in all states and provinces in North America. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
- Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
It is available Clear and in a limited number of factory pigments, White, Light Gray, Medium Gray and Tan. or CrownPigment™ Epoxy 6300 PigmentPack™ *See Crown Polymers Standard Color Guide Acrylics, Epoxies, Polyaspartics, Polyurethanes (PigmentPack).
© 2023 Crown Polymers Corp., All Right Reserved