- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Primer – 320 CrownShield® Clear200 sq. ft. (18.6 sq. m.) 8 mils (0.2 mm) or optional moisture mitigation primer 8303 Clear 100 sq. ft. (9.3 sq. m) 16 mils (0.41 mm)
- Body Coat – 320 CrownShield® Pigmented160 sq. ft. (14.9 sq. m.) 10 mils (0.25mm)
- Top Coat – 8175 CrownPro™ Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25mm)
SYSTEMS
CrownCoat™ 320 CrownShield® Standard Epoxy Pigmented
CrownCoat™ 320 CrownShield® Standard Epoxy Pigmented and 8110 CrownSeal™ Aliphatic Polyester Polyurethane Hangar & Mechanic Flooring System with optional moisture mitigation epoxy, which is placed at a Nominal 28 to 32 Mils (0.61 to 0.81 mm)depending on options.
System Build
CrownCoat™ 320 CrownShield® Standard Epoxy Pigmented and Aliphatic Polyester Polyurethane Hangar and Mechanic Flooring System. The system is placed at a nominal 24 to 32 mils (0.61 to 0.81mm). It meets the Unified Facilities Guide Specification 09 67 23.15 requirements for a three-step aircraft hangar flooring system. It is comprised of a primer, body coat and finish coat,with or without optional sprinkling of skid resistant aluminum oxide aggregate. It can be applied directly over Crown Polymers moisture mitigation primer 8303 CrownShield® when it is required. It is available with an optional integral cove base binder and natural quartz aggregate. It is VOC Compliant in all states and provinces in North America.
- Aircraft Hangars and Maintenance Floors
- Automotive Shopsand MechanicsFloors
- Commercial Retail Floors
- Garage Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Pharmaceutical Floors
- Schools and Universities Floors
- Warehouse Floors Note: Use appropriateFinish Coat
Note: Use appropriate Finish Coat
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin:3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin:4 Coefficient of Friction
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- All components are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved