- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- 1st Membrane – 8502 CrownFlex™ 80 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
- 2nd Membrane – 8502 CrownFlex™ 80 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
- Receiving Coat and Broadcast Color Flake – 8355CrownShield® Pigmented,160 sq. ft. (14.9 sq. m.) per gal (3.79 lt.) 10 mils (0.25 mm), and Single Full Broadcast of SP638 Blended Colors or SP646 Blended Colors, 1/4 Inch ColorFlake 0.15 lbs. to 0.20 lbs. per sq. ft (0.6 to 0.9 kg.).
- Groat Coat - 8101 CrownSeal™ Clear 200 sq. ft. (18.9 sq. m.) 8 mils (0.20 mm)
- Optional Top Coat – 8175-S CrownPro™ Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
CrownFlake™ CushionedFloor™ 8355 CrownShield® High Solids Epoxy Pigmented Full Flake Single Broadcast System
CrownFlake™ CushionedFloor™ 8355 CrownShield® High Solids Pigmented Epoxy Receiving Coat, a Single Full Broadcast of 1/4 Inch Color Flake, Over 8502 CrownFlex™ Membrane Flooring System. It is grouted with 8101 CrownSeal™ WB UV Stable Acrylic and 8175 CrownPro™ Polyaspartic UV Stable Top Coat, that is placed at a Nominal 90 Mils (2.29 mm).
System Build
CrownFlake™ CushionedFloor™ 8355 CrownShield® High Solids, High Build, Pigmented Epoxy Receiving Coat, Single Full Broadcast 1/4 Inch Color Flake, over two coats of 8502 Membrane Flooring System, with optional integral cove base. It is an ergonomically designed seamless floor that provides flexibility comfort not available in hard surface flooring. It is placed at a nominal 90 mils (2.29 mm). It is comprised of two self-priming membrane coats, a receiving coat and color flaked, water based acrylic grout coat and UV stable polyaspartic top coat. It can be applied directly over Crown Polymers moisture mitigation primer. It is available with an optional integral cove base. It is VOC Compliant in all states and provinces in North America.
- Automotive Show Room Floors
- Commercial Retail Floors
- Garage Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Patio and Breezeway Floors
- Pharmaceutical Floors
- Pool Decks
- Schools and Universities Floors
- An ergonomically designed seamless floor that provides flexibility comfort not available in hard surface flooring.
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin:3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin:4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC andEPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- Allcomponents are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved