• (847) 659-0300
CrownSeal™ 8105 CrownSeal™ Standard Grind and Seal Polyurethane

CrownSeal™ 8105 CrownSeal™ Standard Grind and Seal Polyurethane

CrownSeal 8105 CrownSeal Standard Grind and Seal Polyurethane Acrylic Hybrid Two Coat Sealer Flooring System

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. Primer8105 CrownSeal Clear Gloss 300 sq. ft. (27.9 sq. m.) 5.3 mils (0.14 mm)
  3. Top Coat8105CrownSeal Clear Gloss or 8105 CrownSeal Clear Satin 350 sq. ft. (32.5 sq. m.) 4.6 mils (0.12 mm) and Skid-Resistance SP635 (60 Mesh) bleached white aluminum oxide placed as a sprinkle course of 4 to 6 pounds per 100 sq. ft.

CrownSeal 8105 CrownSeal Standard Grind and Seal Polyurethane Acrylic Hybrid Two Coat Sealer Flooring System. It is designed seal properly prepared concrete, polished concrete, and cementitious overlays by providing a long-term low maintenance sealer. It is UV Stable. It inhibits the growth of bacteria, fungus, mildew and mold and qualifies for LEED® Indoor Emitting Materials Credits. It is available in Clear Gloss or Clear Satin. It is impervious and reducing concrete dusting, bodily fluids and house chemicals from penetrating the floor. For slip resistant an optional sprinkle course of aluminum oxide. It can be reapplied when needed by simple cleaning the surfaces, it does not have to be abraded. It is VOC Compliant in all states and provinces in North America.

  • Aircraft Hangars Floors
  • AutomotiveGarageFloors
  • Commercial Retail Indoor and Outdoor Floors
  • Driveways Slabs
  • Hospital and Health Care Facility Floors
  • Patio Slabs
  • Schools and Universities
  • Warehouse Floors
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin:3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin:4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
  • VOC and EPA Compliant. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
  • All components are VOC Compliant in all states and provinces in North America
  • Designed for new floors and for resurfacing old floors
  • Surface only needs to be clean and free of bond breaking substance to be reapplied.
© 2023 Crown Polymers Corp., All Right Reserved