Epoxy / Acrylic / Polyaspartic Full Flake Single Broadcast

CrownFlake 8355 CrownShield® High Solids Pigmented Epoxy Receiving Coat and a Single Full Broadcast of 1/4 Inch Color Flake Flooring System. It is grouted with 8101 CrownSeal WB UV Stable Acrylic and 8175 CrownPro Polyaspartic UV Stable Top Coat, that is placed at a Nominal 50 Mils (1.27 mm).

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. Self-Priming Receiving Coat and Broadcast Color Flake – 8355 CrownShield® Pigmented, 160 sq. ft. (14.9 sq. m.) per gal (3.79 lt.) 10 mils (0.25 mm), and Single Full Broadcast of SP638 Blended Colors or SP646 Blended Colors, 1/4 Inch Color Flake 0.15 lbs. to 0.20 lbs. per sq. ft (0.6 to 0.9 kg.).
  3. Groat Coat – 8101 CrownSeal Clear 200 sq. ft. (18.9 sq. m.) 8 mils (0.20 mm) 5. Optional Top Coat – 8175-S CrownPro Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
  4. Optional Top Coat – 8175-S CrownPro Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)

CrownFlake 8355 CrownShield® High Solids, Hugh Build, Pigmented Epoxy Receiving Coat and a Single Full Broadcast 1/4 Inch Color Flake Flooring System, with optional integral cove base. It is placed at a nominal 50 mils (1.27 mm). It is comprised of a self-priming receiving coat, color flake chips, a water based acrylic and top coated with a UV stable polyaspartic. It can be applied directly over Crown Polymers moisture mitigation primer. It is available with an optional integral cove base. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

  • Automotive Show Room Floors
  • Commercial Retail Floors
  • Garage Floors
  • Hospital and Health Care Facility Floors
  • Laboratories and Research Floors
  • Patio and Breezeway Floors
  • Pharmaceutical Floors
  • Pool Decks
  • Schools and Universities Floors
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
  • VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
  • Strong and Tough Floor.
  • Excellent Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved