- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Primer – 8320 CrownShield® Epoxy Clear 200 sq. ft. (18.6 sq. m.) 8 mils (0.2 mm) or optional moisture mitigation primer 8303 CrownShield® MVB Epoxy Clear 100 sq. ft. (9.3 sq. m.) 16 mils (0.4 mm)
- Body Coat – 8320 CrownShield® Epoxy Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
- Top Coat – 8175 CrownPro™ Polyaspartic and PigmentPack™ 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
Epoxy Chemical Resistant Pigmented 2 Coat
CrownCoat™ 8320 CrownShield® Chemical Resistance BisF/BisA Epoxy Pigmented Hangar & Mechanic Flooring System, which is placed at a Nominal 28 to 36 Mils (0.71 to 0.91 mm)
System Build
CrownCoat™ 8320 CrownShield® Chemical Resistance BisF/BisA Epoxy Pigmented Hangar and Mechanic Flooring System. With optional moisture mitigation primer. The system is placed at a nominal 28 to 36 mils (0.71 to 0.91 mm). It meets the Unified Facilities Guide Specification 09 67 23.15 requirements for a three-step aircraft hangar flooring system. It is comprised of a primer, body coat and finish coat, with or without optional sprinkling of skid resistant aluminum oxide aggregate. It is a chemical resistant BisF/BisA coating. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and natural quartz aggregate. It is VOC Compliant in all states and provinces in North America.
- Aircraft Hangars and Maintenance Floors
- Automotive Shops and Mechanics Floors
- Commercial Kitchens Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Meat, Poultry, and Fish Processing
- Pharmaceutical Floors
- Schools and Universities
- Warehouse Floors
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
- Note: Use appropriate Finish Coat
Note: Use appropriate Finish Coat
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Excellent Chemical Resistance
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance.
- All components are VOC Compliant in all states and provinces in North America.
- The moisture barrier needs to be placed per ASTM E1643 Standard Practice for Selection, Design, Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs, Class A 15 mils (0.38mm).
© 2023 Crown Polymers Corp., All Right Reserved