• (847) 659-0300
Polyaspartic Full Flake Single Broadcast

Polyaspartic Full Flake Single Broadcast

CrownFlake 8175 CrownPro Polyaspartic UV Stable One-Day Single Full Broadcast 1/4 Inch Color Flake Chip Flooring System. It is comprised of a UV Stable Polyaspartic Primer/Receiving Coat and Broadcast Color Flake Chip, and Lock Coat Top Coat, that is placed at a Nominal 50 Mils (1.27 mm).

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. Primer/Receiving Coat and Broadcast Color Flake8175-FCrownPro Clear or Pigmented,160 sq. ft. (14.9 sq. m.) per gal (3.79 lt.) 10 mils (0.25 mm) and Single Full Broadcast of SP638 Blended Colors or SP646 Blended Colors, 1/4 Inch ColorFlake 0.15 to 0.20 lbs. per sq. ft.
  3. Lock Coat8175-S CrownPro Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
  4. Optional Top Coat8175-S CrownPro Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)

CrownFlake 8175 CrownPro UV Stable Polyaspartic Single Full Broadcast 1/4 Inch Color Flake Chip Flooring System, with optional integral cove base. The system is placed at a nominal 50 mils (1.27 mm). It is comprised of a Polyaspartic primer/receiving and color flake chips, and a polyaspartic top coat. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and color quartz flake chips. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

  • Automotive Show Room Floors
  • Commercial Retail Floors
  • Garage Floors
  • Hospital and Health Care Facility Floors
  • Laboratories and Research Floors
  • Patio and Breezeway Floors
  • Pharmaceutical Floors
  • Pool Decks
  • Schools and Universities Floors
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
  • VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
  • Strong and Tough Floor.
  • Excellent Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved