Polyaspartic Partial Flake Single Broadcast

CrownFlake 8175 CrownPro UV Stable Polyaspartic and Partial Broadcast 1/4 Inch Color Flake Chip Flooring System. It is comprised of a UV Stable Polyaspartic Primer/Receiving, Broadcast Color Flake Chip, and UV Stable Lock Coat Top Coat, that is placed at a Nominal 30 Mils (0.76 mm).

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. Primer/Receiving Coat and Broadcast Color Flake – 8175FCrownPro Pigmented,160 sq. ft. (14.9 sq. m.) per gal (3.79 lt.) 10 mils (0.25 mm) and Random Broadcast (15% to 60%) of SP633 1/4 Color Flake Chip 0.02 – 0.05 excess.
  3. Lock Coat – 8175SCrownPro Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)

CrownFlake 8175 CrownPro UV Stable Polyaspartic Partial Broadcast 1/4 Inch Color Flake Chip Flooring System, with optional integral cove base. The system is placed at a nominal 30 mils (0.76 mm). It is comprised of a Polyaspartic primer/receiving and color flake chips, and a polyaspartic top coat. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and color flake chips. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

  • Automotive Show Room Floors
  • Commercial Retail Floors
  • Garage Floors
  • Hospital and Health Care Facility Floors
  • Laboratories and Research Floors
  • Patio and Breezeway Floors
  • Pharmaceutical Floors
  • Pool Decks
  • Schools and Universities Floors
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information
  • VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
  • VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
  • Excellent Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved