- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- 814 CrownCrete-U™ Pigmented or Neutral 30 sq. ft. (2.8 sq. m.) 3/16 inch (4.8 mm) per kit (A Component 8 lbs., B Component 8 lbs., and Component 39 lbs.,) and SP627 Solid or SP628 Blended Color Quartz Aggregate Broadcast at 0.8 lb. per sq. ft. (0.36 kg.)
- Grout Coat / Lock Coat 8175 CrownPro™ Polyaspartic 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
- Top Coat – Coat 8175 CrownPro™ Polyaspartic 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
CrownCrete-U™ 814 Cementitious Urethane Mortar Single Broadcast Color Quartz
CrownCrete-U™ 814 CrownCrete-U™ Cementitious Urethane Mortar and a Single Broadcast of Color Quartz 250 Mil (6.35 mm), with a Polyaspartic Clear Flooring System, 1/4 Inch.
System Build
CrownCrete-U™ 814 CrownCrete-U Cementitious Urethane Mortar and a Single Broadcast of Color Quartz 250 Mil (6.35 mm), with 8175 CrownPro™ Polyaspartic Clear Flooring System, 1/4 Inch. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and color quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Animal Holding and Housing Floors
- Automotive Maintenance Floors
- Commercial Bakeries and Kitchens Floors
- Food and Beverage Processing Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Light and Medium Manufacturing Floors
- Meat, Poultry and Fish Processing Floors
- Pharmaceutical and Vivarium Floors
- School and University Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved