- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Primer – 8318 CrownShield® Clear 200 sq. ft. (18.6 sq. m.) 8 mils (0.20 mm), with or without broadcast aggregate for troweling.
- Binder and Aggregate – 8318 CrownShield® Lightly Pigmented and 90% White and 10% Black Trowel Grade Color Quartz place at 1/4 inch (6.5 mm), 1.25 – 1.5 gal. 8318 CrownShield® and 100 lbs. of Trowel Grade Color Quartz, 48 sq. ft. (or 4.5 sq. meters).
- Grout Coat – 8318 CrownShield® Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
- Orange Peel Top Coat - 8318 CrownShield® Opaque Thixotropic 160 sq. ft. To 200 sq. ft. (14.9 to 18.6 sq. m.) 10 mils (0.25 mm)
SYSTEMS
CrownQuartz™ 8318 CrownShield® Standard Epoxy Light
CrownQuartz™ 8318 CrownShield® Standard Epoxy Light Pigmentedand Trowel Grade Quartz Flooring System.It is composed of Standard Epoxy Primer, Epoxy Binder and Trowel Grade ColorQuartz Aggregates, Epoxy Grout/Lock Coat, and Stipple Epoxy Top Coat that is placed at a Nominal 250 Mils (6.35 mm), 1/4.
System Build
CrownQuartz™ 8318 CrownShield® Standard Epoxy Light Pigmented and Trowel Grade Color Quartz 250 Mils (6.5 mm) Standard Lightly Pigmented System, with Optional 8175 Polyaspartic Finish Coat. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Automotive Show Room Floors
- Commercial Retail Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Pharmaceutical Floors
- Schools and Universities Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin:3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin:4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC andEPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. Allcomponents are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved