- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Three Gallons of 320 CrownShield® epoxy (clear or pigmented) and 50 lbs. of round, uniform in size 40 Mesh Wedron® 480 (or equal) aggregate as a slurry per 50 sq. ft.
- Broadcast 40 Mesh Wedron® 480 (or equal) aggregate 50 lbs. per 50 sq. ft. Remove the excess aggregate the next day.
- Grout/Lock Coat – 320 CrownShield® epoxy Pigmented 100 sq. ft. per gallon.
- Top Coat – 320 CrownShield® Pigmented 160 sq. ft. per gallon.
SYSTEMS
CrownSlurry™ 320 CrownShield® Standard Pigmented Epoxy and Aggregate Slurry
CrownSlurry™ 320 CrownShield® Standard Pigmented Epoxy and Aggregate Slurry and Broadcast Natural Quartz Flooring System. It is composed of Epoxy and Aggregate Slurry Mortar and Broadcast Aggregates, Epoxy Grout/Lock Coat, and Epoxy Top Coat that is placed at a Nominal 250 Mils (6.35 mm), 1/4 inch.
System Build
CrownSlurry™ 320 CrownShield® Standard Pigmented Epoxy and Aggregate installed as a Slurry and Single Broadcast Natural Quartz System. The system is placed at a nominal 250 mils (6.35 mm). It is comprised of an epoxy and aggregate slurry, broadcast aggregate, grout/lock coat and top coat. It can be applied directly over Crown Polymers moisture mitigation primer. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Automotive Show Room Floors
- Commercial Kitchens and Food Processing Floors
- Commercial Retail Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Pharmaceutical Floors
- Schools and Universities Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved