- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Primer – 8318 CrownShield® Clear 200 sq. ft. (18.6 sq. m.) 8 mils (0.2 mm)
- Receiving Coat and Broadcast Natural Quartz – 8318 CrownShield® Pigmented 100 sq. ft. (9.3 sq. m.) per gal (3.79 lt.) 16 mils (0.41mm) and Broadcast 20 – 40 Mesh Natural Quartz at 0.8 lb. per sq. ft. (0.36 kg.)
- Grout/Lock Coat – 8175 CrownPro™ Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
- Top Coat – 8175 CrownPro™ Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
Epoxy Standard Pigmented Single Media Broadcast
CrownBroadcast™ 8318 CrownShield® Standard Epoxy Pigmented Single Broadcast Natural Quartz Flooring System. It is composed of Standard Epoxy Primer, Receiving Coat, Broadcast Natural Quartz Aggregates, 8175 CrownPro™ Polyaspartic Grout/Lock Coat, and Top Coat that is placed at a Nominal 65 Mils (1.65 mm), 1/16 Inch.
System Build
CrownBroadcast™ 8318 CrownShield® Standard Epoxy Pigmented Single Broadcast Decorative Natural Quartz Flooring System, with optional integral cove base. It is placed at a nominal 65 mils (1.65 mm). It is comprised of a primer, epoxy and natural quartz, polyaspartic /lock coat and top coat body coat. It can be applied directly over Crown Polymers moisture mitigation primer. It is available with an optional integral cove base binder and color quartz aggregate. It is also available with an optional fluid proofing and crack suppression membra ne. It is VOC Compliant in all states and provinces in North America.
- Automotive Show Room Floors
- Commercial Retail Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Pharmaceutical Floors
- Schools and Universities Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved