- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Primer – 7521 CrownPro™ AcidShield™ Clear 200 sq. ft. (18.6 sq. m.) 8 mils (0.2 mm)
- Receiving Coat and Broadcast Natural Quartz – 7521 CrownPro™ AcidShield™ Pigmented 100 sq. ft. (9.3 sq. m.) per gal (3.79 lt.) 16 mils (0.41mm) and Broadcast Natural Quartz at 0.8 lb. per sq. ft. (0.36 kg.)
- Grout/Lock Coat - 7521 CrownPro™ AcidShield™ Pigmented 120 sq. ft. (11.1 sq. m.) 13 mils (0.33 mm)
- Top Coat – 7521 CrownPro™ AcidShield™ Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
Novolac Epoxy Pigmented Single Media Broadcast
CrownBroadcast™ 7521 CrownPro™ AcidShield™ Novolac Epoxy Pigmented Single Broadcast Natural Quartz System. It is Comprised of an Epoxy Primer, Epoxy Receiving Coat and Natural Quartz Aggregate, Epoxy Grout Coat, and Epoxy Top Coat that is placed at a Nominal 65 Mils (1.65 mm), 1/16 Inch.
System Build
CrownBroadcast™ 7521 CrownPro™ AcidShield™ Novolac Epoxy Pigmented Single Broadcast Natural Quartz System, with optional integral cove base. The system is placed at a nominal 65 mils (1.65 mm). It is comprised of a primer, epoxy and natural quartz, grout coat and top coat body coat. It is a chemical, solvent, and heat resistant broadcast system. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Automotive Repair Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Pharmaceutical Floors
- Schools and Universities Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved