- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Primer – 8318 CrownShield® Clear 200 sq. ft. (18.6 sq. m.) 8 mils (0.2 mm)
- Receiving Coat and Broadcast Natural Quartz – 8318 CrownShield® Clear 100 sq. ft. (9.3 sq. m.) per gal (3.79 lt.) 16 mils (0.41mm) and Broadcast SP627 Solid or SP628 Blended Color Quartz at 0.8 lb. per sq. ft. (0.36 kg.)
- Grout/Lock Coat - 8318 CrownShield® Clear 120 sq. ft. (11.1 sq. m.) 13 mils (0.33 mm)
- Top Coat – 8318 CrownShield® Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
CrownQuartz™ 8318 CrownShield® Standard Epoxy Color Quartz Single Broadcast System
CrownQuartz™ 8318 CrownShield® Standard Epoxy Clear Single Broadcast Color Quartz Flooring System. It is composed of Standard Epoxy Primer, Epoxy Receiving Coats and Broadcast Color Quartz Aggregates, Epoxy Grout/Lock Coat, and Epoxy Top Coat that is placed at a Nominal 65 Mils (1.65 mm), 1/16 Inch.
System Build
CrownQuartz™ 8318 CrownShield® Standard Epoxy Clear Single Broadcast Decorative Color Quartz Flooring System, with optional integral cove base. The system is placed at a nominal 65 mils (1.65 mm). It is comprised of a primer, epoxy and color quartz, grout/lock coat and top coat body coat, with optional finish coat. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and color quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Automotive Show Room Floors
- Commercial Retail Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Pharmaceutical Floors
- Schools and Universities Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved