- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- Primer – 8320 CrownShield® Clear 200 sq. ft. (18.6 sq. m.) 8 mils (0.2 mm)
- 1st Receiving Coat and Broadcast Natural Quartz – 8320 CrownShield® Clear 100 sq. ft. (9.3 sq. m.) per gal (3.79 lt.) 16 mils (0.41mm) and Broadcast SP627 Solid or SP628 Blended Color Quartz at 0.8 lb. per sq. ft. (0.36 kg.)
- 2nd Receiving Coat and Broadcast Natural Quartz – 8320 CrownShield® Clear 100 sq. ft. (9.3 sq. m.) per gal (3.79 lt.) 16 mils (0.41mm) and Broadcast SP627 Solid or SP628 Blended Color Quartz at 0.8 lb. per sq. ft. (0.36 kg.)
- Grout/Lock Coat - 8320 CrownShield® Clear 120 sq. ft. (11.1 sq. m.) 13 mils (0.33 mm)
- Top Coat – 8320 CrownShield® Clear 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
CrownQuartz™ 8320 CrownShield® Chemical Resistant BisF/BisA Epoxy Color Quartz Double Broadcast System
CrownQuartz™ 8320 CrownShield® Chemical Resistant BisF/BisA Epoxy Clear Double Broadcast Color Quartz Flooring System. It is composed of Chemical Resistant Primer, Two Epoxy Receiving Coats and Broadcast Color Quartz Aggregates, Epoxy Grout/Lock Coat, and Epoxy Top Coat that is placed at a Nominal 125 Mils (3.18 mm), 1/8 Inch
System Build
CrownQuartz™ 8320 CrownShield® Chemical Resistant BisF/BisA Epoxy Clear Double Broadcast Decorative Color Quartz System, with optional integral cove base. It is comprised of a Chemical Resistant primer, 1st epoxy and color quartz, 2nd epoxy and color quartz, grout/lock coat and top coat body coat, with optional top coat. It is a chemical resistant BisF/BisA broadcast system. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and color quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Automotive Show Room Floors
- Commercial Kitchens and Food Processing Floors
- Commercial Retail Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Pharmaceutical Floors
- Schools and Universities Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance. All components are VOC Compliant in all states and provinces in North America
- Strong and Tough Floor.
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved