• (847) 659-0300
818 CrownCrete-U™ SL Cementitious Urethane Mortar

818 CrownCrete-U™ SL Cementitious Urethane Mortar

818 CrownCrete-U SLCementitious Urethane Mortar and a Single Broadcast of Natural Quartz Aggregate 187 Mil(4.75 mm) and Top Coated with CrownCrete-U SC (Skim Coat) Pigmented System, 3/16 Inch.

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. 818 CrownCrete-U Pigmented or Natural45 sq. ft. (4.2 sq. m.) per kit (A Component 8 lbs., B Component 8 lbs., and C Component 25 lbs.,) and SP604 Natural Quartz Aggregate Broadcast or equal at 0.8 lb. per sq. ft. (0.36 kg.)
  3. Top Coat810 CrownCrete-U Pigmented 160 sq. ft. (14.9 sq. m.) per kit (A Component 5 lbs., B Component 5 lbs., and C Component)
  4. Option Top Coat810 CrownCrete-U Pigmented 160 sq. ft. (14.9 sq. m.) per kit (A Component 5 lbs., B Component 5 lbs., and C Component)

818 CrownCrete-U SL Cementitious Urethane Mortar and a Single Broadcast of Natural Quartz187 Mil (4.75 mm) and Top Coated with 810 CrownCrete-U SC(Skim Coat) System 3/16 Inch. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

  • Animal Holding and Housing Floors
  • Automotive Maintenance Floors
  • Commercial Bakeries and Kitchens Floors
  • Food and Beverage Processing Floors
  • Hospital and Health Care Facility Floors
  • Laboratories and Research Floors
  • Light and Medium Manufacturing Floors
  • Meat, Poultry and Fish Processing Floors
  • Pharmaceutical and Vivarium Floors
  • School and University Floors
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin:3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin:4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
  • VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
  • Excellent Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved