• (847) 659-0300
Urethane Cement SL Epoxy CR Topcoat Broadcast 3/16"

Urethane Cement SL Epoxy CR Topcoat Broadcast 3/16"

818 CrownCrete-U Cementitious Urethane Mortar and a Single Broadcast of Natural Quartz 187 Mil (4.75 mm), with 8320 CrownShield® Chemical Resistant Pigmented Topcoat Flooring System, 3/16 Inch.

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. 818 CrownCrete-U Pigmented or Natural 60 sq. ft. (5.8 sq. m.) per kit (A Component 8 lbs., B Component 8 lbs., and Component 25 lbs.,)
  3. SP604 Natural Quartz Aggregate Broadcast at 0.8 lb. per sq. ft. (0.36 kg.)
  4. Grout Coat / Lock Coat 8320 CrownShield® Pigmented 120 sq. ft. (11.1 sq. m.) 13 mils (0.33 mm)
  5. Top Coat8320 CrownShield® 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)

818 CrownCrete-U Cementitious Urethane Mortar and a Single Broadcast of Natural Quartz 187 Mil (4.75 mm), with 8320 CrownShield® Chemical Resistant Flooring System, 3/16 Inch. It can be applied directly over Crown Polymers moisture mitigation primer. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

  • Animal Holding and Housing Floors
  • Automotive Maintenance Floors
  • Commercial Bakeries and Kitchens Floors
  • Food and Beverage Processing Floors
  • Hospital and Health Care Facility Floors
  • Laboratories and Research Floors
  • Light and Medium Manufacturing Floors
  • Meat, Poultry and Fish Processing Floors
  • Pharmaceutical and Vivarium Floors
  • Schools and Universities Floors
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymer Technical Bulletin: 4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
  • VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
  • All components are VOC Compliant in all states and provinces in North America
  • Strong and Tough Floor.
  • Excellent Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved