- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- 838CrownCrete-U™ Pigmented or Neutral 15 sq. ft. (2.9 sq. m.) per kit (A Component 5 lbs., B Component 5 lbs., and C Component 40 lbs.,) and SP604 Natural Quartz Aggregate Broadcast or equal US Sieve Size 30-40 mess at 0.8 lb. per sq. ft. (0.36 kg.)
- Grout Coat - 7521CrownPro™ AcidShield™ Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
- Top Coat – 7521CrownPro™ AcidShield™ Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
SYSTEMS
7521 CrownPro™ AcidShield™ Novolac Epoxy Pigmented Grout Coat
CrownCrete-U™ - 838 TGCementitious Urethane Mortar and a Single Broad-cast of Natural Quartz Aggregate 375 Mil(9.5 mm), 7521 CrownPro™ AcidShield™ Novolac Epoxy Pigmented Grout Coat and Top Coated Flooring System,3/8 inch.
System Build
CrownCrete-U™ - 838TGCementitious Urethane Mortar and a Single Broadcast of Natural Quartz375Mil (9.5 mm), 7521 CrownPro™ AcidShield™ Novolac Epoxy Pigmented Grout Coatedand Top Coated Flooring System,3/8 Inch. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Animal Holding and Housing Floors
- Automotive Maintenance Floors
- Commercial Bakeries and Kitchens Floors
- Food and Beverage Processing Floors
- Hospital and Health Care Facility Floors
- Laboratories and Research Floors
- Light and Medium Manufacturing Floors
- Meat, Poultry and Fish Processing Floors
- Pharmaceutical and Vivarium Floors
- School and University Floors
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin:3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin:4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC andEPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved