818 CrownCrete-U™ Cementitious Urethane Mortar Single Broadcast Natural Quartz

818 CrownCrete-U™ Cementitious Urethane Mortar Single Broadcast Natural Quartz

818 CrownCrete-U Cementitious Urethane Mortar and a Single Broadcast of Natural Quartz 187 Mil (4.75 mm), with 8175 CrownPro Polyaspartic Pigmented Flooring System, 3/16 Inch.

System Build

  1. Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
  2. 818 CrownCrete-U Pigmented or Natural 45 sq. ft. (4.2 sq. m.) per kit (A Component 8 lbs., B Component 8 lbs., and Component 25 lbs.,) and SP604 Natural Quartz Aggregate Broadcast or equal at 0.8 lb. per sq. ft.(0.36 kg.)
  3. Grout Coat / Lock Coat 8175 CrownPro Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)
  4. Top Coat8175 CrownPro Pigmented 160 sq. ft. (14.9 sq. m.) 10 mils (0.25 mm)

818 CrownCrete-U Cementitious Urethane Mortar and a Single Broadcast of Natural Quartz 187 Mil (4.75 mm), with 8175 CrownPro Polyaspartic Flooring System, 3/16 Inch. It can be applied directly over Crown Polymers moisture mitigation primer when it is required. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

  • Animal Holding and Housing Floors
  • Automotive Maintenance Floors
  • Commercial Bakeries and Kitchens Floors
  • Food and Beverage Processing Floors
  • Hospital and Health Care Facility Floors
  • Laboratories and Research Floors
  • Light and Medium Manufacturing Floors
  • Meat, Poultry and Fish Processing Floors
  • Pharmaceutical and Vivarium Floors
  • School and University Floors
  • Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
  • LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
  • VOC and EPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
  • Excellent Chemical and Abrasion Resistance
  • Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved