- Concrete Substrate Profile – ICRI Concrete Surface Profile CSP 2 to CSP 4
- 814 CrownCrete-U™ Pigmented or Neutral 30 sq. ft. (2.8 sq. m.) 3/16 inch (4.8 mm) per kit (A Component 8 lbs., B Component 8 lbs., and Component 39 lbs.).
- Insulation Coat – 320 CrownShield® Clear placed at 160 sq. ft.(10 mils) per gallon.
- Conductive Copper Tape Strip
- Conductive Primer Black – 8601 CrownPro™ StaticShield™ placed at 160 sq. ft. (10 mils) per gallon.
- Static Dissipative Coat – 8602 CrownPro™ StaticShield™ placed at 100 sq. ft. per gallon.
SYSTEMS
CrownCrete-U™ Conductive Cementitious Urethane
CrownCrete-U™814 CrownCrete-U™ Cementitious Urethane 8601 Conductive Primer, and 8602 Conductive Mortar 250 Mil(6.35 mm)System, 1/4 Inch.
System Build
CrownCrete-U™ 814Cementitious Urethane, 8601 Conductive Primer, and 8602 ESD Conductive Mortar250 Mil (6.35 mm)Flooring System,I1/4 inch. Itmeets ANSI/ESD 2020 and ANSI/ESD STM7.1 Standards. It is electrically active within the resistance range of Static Dissipative 25 thousand to 1 million ohms (2.5E4-1E6) resistance range as tested per ANSI/ESD Association ANSI/ESD STM 7.1. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
- Areo-space and Avionics Manufacturing
- Automotive Manufacturing
- Biotechnology Research and Manufacturing
- Computer Rooms
- Cosmetics Research and Manufacturing
- EV Battery Production
- Flammable Chemicals Production, Storage and Use
- High-Tech Electronics
- Hospital and Healthcare Facilities
- Lazer and Optical Systems
- Medical Equipment Manufacturing
- Munition and Fireworks Production
- Oil and Chemical Production
- Pharmaceutical Research and Manufacturing
- Powdered Foodstuffs Production
- Semi-Conductor Production
- Meets ANSI/ESD 2020 and ANSI/ESD STM7.1 Standards
- Complies with USDA, FDA, Food Safety Modernization Act. See Crown Polymers Technical Bulletin:3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin:4 Coefficient of Friction.
- LEED® and Green Seal® requirements. See Crown Polymers Technical Bulletin: 5 LEED and Green Seal Information.
- VOC andEPA Compliant, and low odor during installation. Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
- Excellent Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
© 2023 Crown Polymers Corp., All Right Reserved