Home / ESD Static Dissipative & Conductive / ESD Conductive Mortar System

ESD Conductive Mortar System

System Sheet

Description

ESD Conductive Mortar System meets ANSI/ESD 2020 and ANSI/ESD STM7.1 Standards and is placed at a nominal thickness of 250 mils (1/4”). It is electrically active within the resistance range of Static Dissipative 25 thousand to 1 million ohms (2.5E4-1E6) resistance range as tested per ANSI/ESD Association ANSI/ESD STM 7.1. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.

System Build

  1. Substrate

    Prepared Concrete

  2. Base Coat

    814 CrownCrete-U

  3. Insulation Coat

    320 CrownShield Insulation Coat

  4. Tape

    Conductive Copper Tape

  5. Primer

    8601 Conductive Primer

  6. Top Coat

    8602 StaticShield

Typical Uses

Aerospace & Avionics

Automotive Maintenance & Repair

Bio Technology & Research

Computer & Data Housing

EV Battery Production

Chemical Processing & Storage

Flammable & Explosive Areas

Medical Equipment

Semi-Conductor Production

Lazer and Optical Systems

Medical Equipment Manufacturing

Munition and Fireworks Production

Oil and Chemical Production

Pharmaceutical Research and Manufacturing

Powdered Foodstuffs Production

Semi-Conductor Production

Benefits

  • Complies with USDA, FDA, FSMA. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
  • LEED requirements. See Crown Polymers Technical Bulletin: 5 LEED information
  • Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance