Home / Broadcast Systems / CrownFlake Cushioned Floor System

CrownFlake Cushioned Floor System

CrownFlake CushionedFloor 8355 CrownShield High Solids, High Build, Pigmented Epoxy Receiving Coat, Single Full Broadcast 1/4 Inch Color Flake, over two coats of 8502 Membrane Flooring System, with optional integral cove base. It is an ergonomically designed seamless floor that provides flexibility comfort not available in hard surface flooring. It is placed at a nominal 90 mils (2.29 mm). It is comprised of two self-priming membrane coats, a receiving coat and color flake and UV stable polyaspartic top coat. It can be applied directly over Crown Polymers moisture mitigation primer. It is available with an optional integral cove base. It is SCAQMD compliant for Industrial Use Only.

Description

CrownFlake™ CushionedFloor™ 8355 CrownShield® High Solids, High Build, Pigmented Epoxy Receiving Coat, Single Full Broadcast 1/4 Inch Color Flake, over two coats of 8502 Membrane Flooring System, with optional integral cove base. It is an ergonomically designed seamless floor that provides flexibility comfort not available in hard surface flooring. It is placed at a nominal 90 mils (2.29 mm). It is comprised of two self-priming membrane coats, a receiving coat and color flaked, water based acrylic grout coat and UV stable polyaspartic top coat. It can be applied directly over Crown Polymers moisture mitigation primer. It is available with an optional integral cove base. It is VOC Compliant in all states and provinces in North America.

System Build

  1. Substrate

    Prepared Concrete

  2. Primer Coat

    8502 CrownFlex Primer

  3. Base Coat

    8502 CrownFlex Base

  4. Receiving Coat

    8355 Receiving Coat

  5. Broadcast Coat

    Blended Flake Broadcast

  6. Clear Top Coat

    8175 Clear Polyaspartic

Typical Uses

Animal Care and Housing

Automotive Maintenance & Repair

Commercial Bakeries and Kitchens

Food & Beverage Processing

School & University Floors

Pharmaceutical & Vivarium Floors

Garage Floors, Patios & Pooldecks

Benefits

  • Complies with USDA, FDA, FSMA. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
  • Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
  • LEED requirements. See Crown Polymers Technical Bulletin: 5 LEED information
  • Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance