CrownSlurry Epoxy System
Description
CrownSlurry Epoxy System is high-build resurfacing coating designed for durability comprised of 320 CrownShield™ Standard Pigmented Epoxy and Aggregate installed as a Slurry and Single Broadcast Natural Quartz System. The system is placed at a nominal 250 mils (1/4”). It can be applied directly over Crown Polymers moisture mitigation primer. It is available with an optional integral cove base binder and natural quartz aggregate. It is also available with an optional fluid proofing and crack suppression membrane. It is VOC Compliant in all states and provinces in North America.
System Build
-
Substrate
Prepared Concrete
-
Basecoat
320 CrownShield™ Clear w/ Silica Sand
-
Broadcast Coat
40 Mesh Silica Sand Broadcast
-
Pigmented Coat
320 CrownShield™ Pigmented
-
Topcoat
320 CrownShield™ Pigmented
Typical Uses
Animal Care & Housing
Automotive Maintenance & Repair
Commercial Bakeries and Kitchens
Hospital and Health Care Facility Floors
Laboratories and Research Floors
Manufacturing Facility Floors
School & University Floors
Pharmaceutical & Vivarium Floors
Benefits
- Complies with USDA, FDA, FSMA. See Crown Polymers Technical Bulletin: 3 Food and Beverage Compliance.
- Slip Resistance (ADA) See Crown Polymers Technical Bulletin: 4 Coefficient of Friction.
- LEED requirements. See Crown Polymers Technical Bulletin: 5 LEED information
- Cures to an inert finish. See Crown Polymers Technical Bulletin: 2 VOC Compliance
