8355 CrownShield® Pigmented Epoxy
General Purpose Epoxy Thru-Product – Primer, Body Coat, Binder, & Topcoat
Description
8355 CrownShield is a 2 component, high build, high pigmented load epoxy binder that is specially designed to receive CrownFlake System vinyl chips 1/8 inch and 1/4-inch flakes. It is self-priming and it is formulated as a moisture tolerant epoxy binder and bonds tenaciously dry or damp concrete. It can be applied directly to “saturated surface dry” (SDS) concrete slabs on grade (with no standing water). The high pigment load design means that it easily hides concrete between 160 to 200 square feet (14.9 to 18.9 sq. m) in a single coat application. It has amble working time to cut-ins, place, and broadcast the vinyl chips. CrownShield No. 8355 Accelerator (6 wt. oz. per 2 gals) is available when rapid cure is required. It is VOC Compliant in all states and provinces in North America.
Typical Uses
- Animal Care and Housing Floors
- Automotive Show Room and Repair Floors
- Commercial Bakery and Kitchen Floors
- Food, Beverage and Spirits Processing
- Hospital and Health Care Facility Floors
- Laboratory and Research Floors
- Manufacturing and Warehouse Floors
- Pharmaceutical Floors
- School and University Floors
Benefits
- Complies with USDA, FDA, Food Safety Modernization Act
- Slip Resistance (ADA)
- LEED® requirements
- 100% Solids, Zero VOC and EPA Compliant, and low odor during installation.
- VOC and EPA Compliant, and low odor during installation. Cures to an inert finish.
- Strong and Tough Floor
- Strong Chemical and Abrasion Resistance
- Designed for new floors and for resurfacing old floors
